Introduction:
In this tutorial we will learn to create a "system assembly" mechanism
simple combustion engine. In assembly of the system will be comprised of four (4) part:
1. engine block
2. Piston (piston)
3. connecting Rod
4. Crank Shaft (crank shaft)
This will be composed of different instruction sets in the first part we will make the -
parts, and then another part and the last move we'll
Assembly system is based on degrees of freedom (degrees of freedom / Finance), a
we specify.
In the tutorial we will assemble the parts we have made in the tutorial
previously. Several new orders, including: Add component into the assembly;
Component Placement on this panel was the Placement Panel and Soft Panel.
There are various options available constraint: Mate; Align; Enter; coord systems; tangent;
PNT Online; PNT On SRF; Edge Of SRF; angle. Because our assembly system is still simple,
so we will only use the Automatic option restriction. When a given
quite restricted, it is considered as a restriction completely, if the restriction
Packaged to be adequate. Because at the end of the assembly we will drive partpart
, Then we will leave a step is one of freedom (to be
move), whether such an offer on the motion of rotating or sliding Crank as in the piston.
Open Pro / ENGINEER> click the New icon on the toolbar> dialog
We will see New> the type chosen by the Assembly> new column name
Name> name MesinTorak> click OK
We will see "graphical user interface" for Pro / ENGINEER wildfire 3.0 to
seher name on the top left.
continued
