continue with the tutorial yesterday
We will move to the top> click Move panel (arrow 1)> Motion Type select =
Translate (arrow 2)> click on the piston portion left> draw up, as shown
In order to simplify the display, turn the Datum Planes; points Datum & Coordinate
System (arrow 1)> Go back to the Panel> Motion Type select Rotate (arrow 2)>
rotary piston about 90 degrees (arrow 3), it looked like this, and then click on the
check to continue with the next step.
We will add a third (Conrod) into the assembly system, starting with
click on the "Enter the assembly component" in the toolbar right-> dialog
We will see Open> select conrod.prt> then click Open
Component placement panel will appear at the bottom, we will choose
Automatic reference constraining based on which we will specify, as
choose the reference axis and the axis of Conrod A_4 A_5 of the piston, such as
figure below.
continued
